|
Product Details:
Contact Now
Chat Now
|
| Products Name: | Rexroth Hydraulic Piston Pump | Inlet Connection: | Threaded Or Flanged |
|---|---|---|---|
| Mounting Type: | Flange, Foot, And Face | Pump Shaft Position: | Horizontal |
| Productname: | Rexroth Hydraulic Pump | Application: | Industrial Machinery, Mobile Hydraulics |
| Highlight: | Rexroth A10VSO45,A10VSO 45,A10VSO45 Industrial Hydraulic Pump |
||
![]()
① Coaxiality: When coupling with the motor, use a flexible coupling and ensure coaxiality ≤0.05 mm (radial) and ≤0.1 mm (axial) via dial indicator—misalignment exceeding 0.1 mm will cause bearing wear within 300 hours
② Mounting flange: Tighten DIN 24336 Type D flange bolts to 85 N*m torque (use torque wrench, follow VDI 2230 standards)
③ Suction line: Use hose with inner diameter ≥25 mm (avoid ≤20 mm to prevent cavitation), length ≤2 m, and suction height ≤500 mm (from oil level to pump center); install a 100 μm suction strainer
① Pressure port (P): Use DN20 steel pipe (PN40) or high-pressure hose (R12), tighten to 120 N*m; install a pressure gauge (0-400 bar) 10 cm from the port to monitor real-time pressure
② Suction port (S): Use smooth-bore hose (avoid corrugated pipes) with no throttling components; ensure the line is filled with oil before startup
③ Case drain port (T): Mandatory to use DN15 hose, directly connect to the tank (no valves or reducers), and ensure the port is 10 cm above the tank oil level to prevent back pressure
④ Control ports (X, Y): For FR control, connect port X to the pilot pressure source (30-40 bar) and port Y to the tank; use DN8 hose
Contact Person: zixin
Tel: +8613225988223