R928005996 1.0630 G25-A00-0-M R928006036 1.1000 PWR20-A00-0-M R928006050 2.0004 G25-A00-0-MRexroth Industrial Machinery Filter Cartridge Imported from Germany
R928005996 1.0630 G25-A00-0-M R928006036 1.1000 PWR20-A00-0-M R928006050 2.0004 G25-A00-0-MRexroth Industrial Machinery Filter Cartridge Imported from Germany
| Parameter |
Details |
| Structure |
Cartridge |
| Condition |
New |
| Type |
Press Filter |
| Warranty |
12 Months |
| Place of Origin |
Fujian, China |
| Brand Name |
Rexroth |
| Dimension (L * W * H) |
OD * ID * H (mm) |
| Weight |
1.5 kg |
| Model Number |
R928005892 1.0160H20XL-A00-0-M |
R928006432 2.0030 PWR20-A00-0-M
R928006458 2.0030 PWR10-A00-0-V
R928006482 2.0045 G25-A00-0-M
R928006486 2.0045 PWR20-A00-0-M
R928006644 2.0040 G25-A00-0-M
R928006645 2.0040 PWR3-A00-0-M
R928006646 2.0040 PWR6-A00-0-M
R928006654 2.0040 PWR3-B00-0-M
R928006656 2.0040 PWR10-B00-0-M
R928006657 2.0040 PWR20-B00-0-M
R928006699 2.0063 PWR3-A00-0-M
R928006700 2.0063 PWR6-A00-0-M
R928006701 2.0063 PWR10-A00-0-M
R928006708 2.0063 PWR3-B00-0-M
R928006710 2.0063 PWR10-B00-0-M
R928006752 2.0100 G25-A00-0-M
R928006753 2.0100 PWR3-A00-0-M
R928006754 2.0100 PWR6-A00-0-M
R928006755 2.0100 PWR10-A00-0-M
R928006762 2.0100 PWR3-B00-0-M
R928006763 2.0100 PWR6-B00-0-M
R928006764 2.0100 PWR10-B00-0-M
R928006807 2.0160 PWR3-A00-0-M
R928006808 2.0160 PWR6-A00-0-M
R928006809 2.0160 PWR10-A00-0-M
R928006816 2.0160 PWR3-B00-0-M
FAQ: Installation & Application Questions
Q: What problems should be paid attention to during installation?
A: First, ensure that the installation position is correct and aligned with the interface of the filter housing to avoid leakage caused by improper fitting. Second, do not over-tighten during installation; follow the equipment manual's torque requirements to prevent damage to the filter element's sealing ring or housing. In addition, before installation, clean the pipeline interface to avoid introducing new impurities into the system. Finally, confirm that the flow direction of the fluid is consistent with the marked direction on the filter element.
Q: Why does the system have fluid leakage after installing the filter element?
A: The common causes include damaged or aged sealing rings of the filter element, improper installation that leads to poor fitting between the filter element and the housing, and thread damage at the installation interface. First, check whether the sealing ring is intact; if not, replace it in time. Then, re-install it according to the standard process and inspect the thread and interface for wear. If there is wear, repair or replace the relevant parts.
Your message must be between 20-3,000 characters!
